产品概述：在线交互式不断电系统Otima II Tower 的额定电压范围为800VA至5KVA，可提供服务器级全功率保护，可防止电源故障，尖峰和突波，占地面积小，输出功率因数为0.9。该系列适用于网络，电信，服务器和任务关键型应用。
在线交互式不断电系统
Otima II Tower 的额定电压范围为800VA至5KVA，可提供服务器级全功率保护，可防止电源故障，尖峰和突波，占地面积小，输出功率因数为0.9。该系列适用于网络，电信，服务器和任务关键型应用。
主要特点
●纯正弦波
●输出功率因数0.9
●可调式电源管理插座
●ECO（效率校正优化器）节能运行
●高效率电池运行模式
●升压和降压AVR以实现电压稳定
●可提供多种通信端口
●3节式智能充电设计
●可选用的HID电源设备USB端口
产品规格
| MODEL | Otima II T 800 | Otima II T 1.1K | Otima II T 1.5K | Otima II T 2K | Otima II T 2.5K | Otima II T 3K | |
| 容量 | 800 VA / 720 W | 1100 VA / 990 W | 1500 VA / 1350 W | 2000 VA / 1800 W | 2500 VA / 2250 W | 3000 VA / 2700 W | |
| 输入 | |||||||
| 额定电压 | 110/115/120/127 VAC or 208/220/230/240 VAC | ||||||
| 可接受的电压范围 | 81-152 VAC or 162-290 VAC | ||||||
| 频率范围 | 60/50 Hz (auto sensing) | ||||||
| 输出 | |||||||
| 输出电压 | 110/115/120/127 VAC or 208/220/230/240 VAC | ||||||
| 频率范围（电池模式） | 50 Hz or 60 Hz ± 1 Hz | ||||||
| 转移时间 | Typical 2-6 ms, 10ms max. | ||||||
| 波形（电池模式） | Pure Sine Wave | ||||||
| 电压调节（电压模式） | ± 1.5% (before battery alarm) | ||||||
| 当前波峰比率 | 3:1 | ||||||
| 谐波失真 | 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm) | ||||||
| 效率 | |||||||
| 电池模式 | ≧ 88%, up to 90% @ nominal battery voltage | ≧89%, up to 91% @ nominal battery voltage for 110/115/120/127 VAC ≧91%, up to 92% @ nominal battery voltage for 208/220/230/240 VAC | |||||
| 降压和升压模式 | 95% | ||||||
| ECO模式 | 97% | ||||||
| 电池 | |||||||
| 典型充电时间 | 4 hours recover to 90% capacity | ||||||
| 充电器电压 | 27.4 VDC ± 1% | 54.8 VDC ± 1% | 82.1 VDC ± 1% | ||||
| 充电电流（最大） | 1.5 A | ||||||
| 电池类型与数量 | 12 V/7 Ah x 2 | 12 V/9 Ah x 2 | 12 V/7 Ah x 4 | 12 V/9 Ah x 4 | 12 V/7 Ah x 6 | 12 V/9 Ah x 6 | |
| 保护 | |||||||
| 全面保护 | Overload, discharge, and overcharge protection | ||||||
| 指标 | |||||||
| 液晶显示器 | AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery | ||||||
| 警报 | |||||||
| 电池模式 | Sounding every 10 seconds | ||||||
| 低电量 | Sounding every 2 seconds | ||||||
| 超载 | Sounding every second | ||||||
| 故障 | Continuously sounding | ||||||
| 环境 | |||||||
| 工作湿度 | 0~90% RH @ 0- 40°C (non-condensing) | ||||||
| 噪音水平 | Less than 45dB | ||||||
| 物理 | |||||||
| 尺寸，深 X 宽 X 高（mm） | 397 x 145 x 220 | 455 x 145 x 220 | 421 x 190 x 318 | ||||
| 净重/公斤 | 11.7 | 12.1 | 17.2 | 19.7 | 26.6 | 29 | |
| 管理 | |||||||
| 可选的SNMP | Power management from SNMP manager and web browser | ||||||
| 智能RS-232 / USB | Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux, and MAC | ||||||
| Model | Otima II T 5K | |
| 容量 | 5000 VA / 4500 W | |
| 输入 | ||
| 额定电压 | 208/220/230/240 VAC | |
| 可接受的电压范围 | 162-290 VAC | |
| 频率范围 | 60/50 Hz (auto sensing) | |
| 输出 | ||
| 输出电压 | 208/220/230/240 VAC | |
| 频率范围（电池模式） | 50 Hz or 60 Hz ± 1 Hz | |
| 转移时间 | Typical 2-6 ms, 10ms max. | |
| 波形（电池模式） | Pure Sine Wave | |
| 电压调节（电压模式） | ± 1.5% (before battery alarm) | |
| 当前波峰比率 | 3:1 | |
| 谐波失真 | 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm) | |
| 效率 | ||
| 电池模式 | ≧91%, up to 92% @ nominal battery voltage | |
| 降压和升压模式 | 95% | |
| ECO模式 | 97% | |
| 电池 | ||
| 典型充电时间 | 4 hours recover to 90% capacity | |
| 充电器电压 | 82.1 VDC ± 1% | |
| 充电电流（最大） | 1.5 A | |
| 电池类型与数量 | 12 V/10 Ah x 6 | |
| 保护 | ||
| 全面保护 | Overload, discharge, and overcharge protection | |
| 指标 | ||
| 液晶显示器 | AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery | |
| 警报 | ||
| 电池模式 | Sounding every 10 seconds | |
| 低电量 | Sounding every 2 seconds | |
| 超载 | Sounding every second | |
| 故障 | Continuously sounding | |
| 环境 | ||
| 工作湿度 | 0~90% RH @ 0- 40°C (non-condensing) | |
| 噪音水平 | Less than 45dB | |
| 物理 | ||
| 尺寸，深 X 宽 X 高（mm） | 421 x 190 x 318 | |
| 净重/公斤 | 34.5 | |
| 管理 | ||
| 可选的SNMP | Power management from SNMP manager and web browser | |
| 智能RS-232 / USB | Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux, and MAC | |
